How To Configure Wifi On Windows Xp

Download Article

Microsoft Internet Connectedness Sharing enables a calculator connected to the Internet via a cable or DSL modem to share its connexion with other computers continued to it.

1

Click Get-go, and then click Control Console.
2

Click Network and Internet Connections, Click Network Connections.

Advertisement
3

Right-click the connection that y'all use to connect to the Internet. For instance, if you connect to the Net past using a modem, right-click the connexion that you want nether Punch-up.
iv

Click Properties. Click the Advanced tab.
5

Under Net Connection Sharing, select the Allow other network users to connect through this computer'southward Net connection cheque box.
6

If you are sharing a punch-upwards Internet connection, select the Establish a dial-upwards connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.
7

Click OK. Yous receive a message, Click Yes.

Advertizement

1

Click Showtime, and then click Command Panel. Click Network and Internet Connections. Click Network Connections.
2

Right-click Local Expanse Connectedness, and so click Properties.
3

Click the Full general tab, click Internet Protocol (TCP/IP) in the This connection uses the following items list, and then click Properties.
iv

In the Cyberspace Protocol (TCP/IP) Properties dialog box, click Obtain an IP accost automatically (if it is not already selected), and then click OK.
5

In the Local Surface area Connection Properties dialog box, click OK.
6

Open your browser to check, if what y'all did works.

Add New Question

Question

How do I connect internet from mobile to Windows Ultimate via Wi-Fi?

You can utilise your telephone equally a Wi-Fi hotspot. Go to the settings on your phone and find an pick named: Tethering & Portable hotspot. Then you can employ one of the options: Wi-Fi, Bluetooth, and USB Tethering. You will demand to connect your phone to your PC with a USB cable first if you utilize the USB option.
Question

How to connect to wired WiFi connection?

AmongUsIsC00l

Customs Answer

Get an ethernet cable, so, plug one stop into the router, and the other finish in the computer. If your ethernet connection is not recognized, make sure the commuter is installed.

Enquire a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Video

If you are using a cable, the computer that is sharing connection should have two LAN slots.
The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is continued to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0
You lot tin also assign a unique static IP address in the range of 192.168.0.2 to 192.168.0.254. For example, you lot tin assign the following static IP accost, subnet mask, and default gateway:
- IP Accost 192.168.0.2
- Subnet mask 255.255.255.0
- Default gateway 192.168.0.1